UGC NET Forensic Science: UNIT 2 MCQs – Analytical Techniques
This MCQ practice set covers all five major areas of analytical techniques used in forensic science. Each question is followed immediately by its correct answer and a brief explanation.
Topics covered:
- Spectroscopy and its types
- Chromatography and its types
- Microscopy and its types
- Electrophoresis and its types
- Advanced techniques used in forensic science
Section 1: Spectroscopy and Its Types
Q1. Which of the following techniques is primarily based on the absorption of ultraviolet and visible radiation by molecules?
A. IR Spectroscopy
B. UV-Visible Spectroscopy
C. NMR Spectroscopy
D. Mass Spectrometry
Answer: B. UV-Visible Spectroscopy
Explanation: UV-Visible spectroscopy measures the absorption of ultraviolet and visible light by molecules. It is commonly used for quantitative analysis and the identification of certain compounds.
Q2. Which spectroscopy is most commonly used to identify functional groups in organic compounds?
A. UV Spectroscopy
B. IR Spectroscopy
C. Atomic Absorption Spectroscopy
D. Fluorescence Spectroscopy
Answer: B. IR Spectroscopy
Explanation: Infrared spectroscopy identifies functional groups by measuring molecular vibrations, such as stretching and bending of chemical bonds.
Q3. The fingerprint region in IR spectroscopy generally lies between:
A. 4000–2500 cm⁻¹
B. 2500–2000 cm⁻¹
C. 1500–400 cm⁻¹
D. 400–100 cm⁻¹
Answer: C. 1500–400 cm⁻¹
Explanation: The fingerprint region contains complex absorption patterns that are characteristic of individual compounds and helps in their identification.
Q4. Which of the following techniques is based on the interaction of atomic nuclei with a magnetic field?
A. NMR Spectroscopy
B. Raman Spectroscopy
C. UV Spectroscopy
D. IR Spectroscopy
Answer: A. NMR Spectroscopy
Explanation: Nuclear Magnetic Resonance (NMR) spectroscopy studies nuclei with non-zero spin in an external magnetic field. It is useful for determining molecular structure.
Q5. Raman spectroscopy is primarily based on:
A. Absorption of infrared radiation
B. Elastic scattering of light
C. Inelastic scattering of light
D. Emission of X-rays
Answer: C. Inelastic scattering of light
Explanation: Raman spectroscopy is based on inelastic scattering of monochromatic light. The change in energy of scattered photons provides information about molecular vibrations.
Q6. Which technique is particularly useful for detecting trace quantities of metals in forensic samples?
A. FTIR
B. Atomic Absorption Spectroscopy
C. NMR
D. UV-Visible Spectroscopy
Answer: B. Atomic Absorption Spectroscopy
Explanation: Atomic Absorption Spectroscopy (AAS) measures the absorption of characteristic radiation by free ground-state atoms. It is widely used for detecting metals such as lead, copper and arsenic.
Q7. Beer-Lambert's law establishes a relationship between absorbance and:
A. Temperature and pressure
B. Concentration and path length
C. Wavelength and frequency
D. Density and viscosity
Answer: B. Concentration and path length
Explanation: According to Beer-Lambert's law, absorbance is directly proportional to the concentration of the absorbing substance and the path length of light through the sample.
Q8. Which spectroscopic technique is commonly used to study elemental composition using characteristic X-ray emission?
A. X-ray Fluorescence Spectroscopy
B. NMR Spectroscopy
C. IR Spectroscopy
D. Raman Spectroscopy
Answer: A. X-ray Fluorescence Spectroscopy
Explanation: XRF identifies and measures elements by detecting characteristic fluorescent X-rays emitted after excitation of a sample. It is useful in forensic analysis of glass, paint and gunshot residue.
Q9. Which spectroscopy is based on the emission of light from excited atoms?
A. Atomic Emission Spectroscopy
B. IR Spectroscopy
C. NMR Spectroscopy
D. Raman Spectroscopy
Answer: A. Atomic Emission Spectroscopy
Explanation: In atomic emission spectroscopy, atoms are excited by an energy source and emit light at characteristic wavelengths when they return to lower energy states.
Q10. Which of the following techniques is most suitable for examining molecular vibrations without requiring strong absorption of infrared radiation?
A. Raman Spectroscopy
B. NMR Spectroscopy
C. AAS
D. XRF
Answer: A. Raman Spectroscopy
Explanation: Raman spectroscopy detects changes in scattered light associated with molecular vibrations. It is complementary to IR spectroscopy because their selection rules differ.
Section 2: Chromatography and Its Types
Q11. Chromatography is primarily based on the differential distribution of components between:
A. Two stationary phases
B. Stationary and mobile phases
C. Two mobile phases
D. Two gaseous phases
Answer: B. Stationary and mobile phases
Explanation: Chromatography separates components based on their different affinities for the stationary and mobile phases. Components move at different rates, resulting in separation.
Q12. Which of the following is used as a stationary phase in Thin Layer Chromatography (TLC)?
A. Nitrogen
B. Silica gel
C. Helium
D. Methanol
Answer: B. Silica gel
Explanation: Silica gel and alumina are commonly used as stationary phases in TLC. The mobile phase moves through the adsorbent layer and separates the components.
Q13. The Rf value in Thin Layer Chromatography is calculated by:
A. Distance travelled by solvent / Distance travelled by solute
B. Distance travelled by solute / Distance travelled by solvent front
C. Distance travelled by solvent × Distance travelled by solute
D. Distance travelled by solute + Distance travelled by solvent
Answer: B. Distance travelled by solute / Distance travelled by solvent front
Explanation: The retention factor (Rf) is the ratio of the distance travelled by the centre of the compound spot to the distance travelled by the solvent front, both measured from the origin.
Q14. Which chromatography technique is most suitable for separating volatile compounds?
A. Paper Chromatography
B. Gas Chromatography
C. Thin Layer Chromatography
D. Ion Exchange Chromatography
Answer: B. Gas Chromatography
Explanation: Gas Chromatography (GC) is used to separate volatile and thermally stable compounds. It is widely applied in forensic toxicology and arson investigations.
Q15. In High Performance Liquid Chromatography (HPLC), the mobile phase is:
A. Gas
B. Liquid
C. Solid
D. Plasma
Answer: B. Liquid
Explanation: HPLC uses a liquid mobile phase that is pumped under high pressure through a column containing the stationary phase.
Q16. Which type of chromatography separates molecules based on their charge?
A. Gel Filtration Chromatography
B. Ion Exchange Chromatography
C. Affinity Chromatography
D. Gas Chromatography
Answer: B. Ion Exchange Chromatography
Explanation: Ion exchange chromatography separates molecules according to their net electrical charge using charged stationary-phase groups.
Q17. Size Exclusion Chromatography separates molecules primarily on the basis of:
A. Molecular size
B. Molecular charge
C. Boiling point
D. Solubility
Answer: A. Molecular size
Explanation: Larger molecules generally pass through the column more quickly because they cannot enter the pores of the stationary phase. Smaller molecules enter the pores and take a longer path.
Q18. Which chromatography technique involves the separation of substances based on specific biological interactions?
A. Paper Chromatography
B. Affinity Chromatography
C. Gas Chromatography
D. Adsorption Chromatography
Answer: B. Affinity Chromatography
Explanation: Affinity chromatography uses highly specific interactions, such as antigen-antibody or enzyme-substrate binding, to separate molecules.
Q19. In Paper Chromatography, the stationary phase is primarily:
A. Silica gel
B. Cellulose paper with associated water
C. Liquid nitrogen
D. Activated charcoal
Answer: B. Cellulose paper with associated water
Explanation: Water associated with cellulose fibres acts as the stationary liquid phase in conventional paper partition chromatography, while the solvent acts as the mobile phase.
Q20. Which of the following techniques is commonly used for the analysis of drugs and poisons in biological samples?
A. GC-MS
B. Simple distillation
C. Filtration
D. Centrifugation alone
Answer: A. GC-MS
Explanation: Gas Chromatography-Mass Spectrometry combines separation by GC with identification by mass spectrometry. It is widely used in forensic drug and toxicological analysis.
Section 3: Microscopy and Its Types
Q21. Which microscope uses visible light and glass lenses to magnify specimens?
A. Electron Microscope
B. Compound Light Microscope
C. Scanning Electron Microscope
D. Transmission Electron Microscope
Answer: B. Compound Light Microscope
Explanation: A compound light microscope uses visible light and multiple lenses to magnify small objects. It is commonly used for examining cells, tissues and biological evidence.
Q22. Which microscope provides a three-dimensional appearance of the specimen's surface?
A. TEM
B. SEM
C. Compound Microscope
D. Phase Contrast Microscope
Answer: B. SEM
Explanation: Scanning Electron Microscopy (SEM) scans the specimen surface with an electron beam and produces detailed images of surface topography.
Q23. Transmission Electron Microscopy (TEM) is particularly useful for studying:
A. Surface topography only
B. Internal ultrastructure of specimens
C. Colour of biological samples
D. Large objects without preparation
Answer: B. Internal ultrastructure of specimens
Explanation: TEM transmits electrons through an ultrathin specimen to reveal its internal ultrastructure at very high resolution.
Q24. Which microscopy technique is useful for observing living cells without staining?
A. Phase Contrast Microscopy
B. SEM
C. TEM
D. Polarizing Microscopy
Answer: A. Phase Contrast Microscopy
Explanation: Phase contrast microscopy converts differences in optical path length into variations in image contrast. It allows transparent living cells to be observed without staining.
Q25. Which microscope is particularly useful for examining birefringent materials?
A. Fluorescence Microscope
B. Polarizing Microscope
C. Electron Microscope
D. Dark Field Microscope
Answer: B. Polarizing Microscope
Explanation: Polarizing microscopy uses polarized light to study materials that exhibit optical anisotropy, such as crystals, fibres and certain minerals.
Q26. Fluorescence microscopy works on the principle of:
A. Reflection of sound waves
B. Emission of light after absorption of shorter-wavelength radiation
C. Transmission of electrons
D. Scattering of X-rays
Answer: B. Emission of light after absorption of shorter-wavelength radiation
Explanation: Fluorescent substances absorb light at a particular wavelength and emit light at a longer wavelength. This is useful for detecting specific biological materials.
Q27. Which microscopy technique is commonly used to examine the striation marks on bullets?
A. Comparison Microscope
B. Dark Field Microscope
C. Phase Contrast Microscope
D. Fluorescence Microscope
Answer: A. Comparison Microscope
Explanation: A comparison microscope consists of two microscopes connected through an optical bridge, allowing simultaneous comparison of bullets, cartridge cases and toolmarks.
Q28. The resolving power of a microscope refers to its ability to:
A. Increase the size of an image
B. Distinguish two closely spaced objects as separate
C. Change the colour of a specimen
D. Increase the brightness of an image
Answer: B. Distinguish two closely spaced objects as separate
Explanation: Resolution determines the ability to distinguish two nearby points as separate. Higher resolving power allows finer details to be observed.
Q29. Which microscope is most suitable for observing unstained, transparent specimens against a dark background?
A. Dark Field Microscope
B. TEM
C. SEM
D. Polarizing Microscope
Answer: A. Dark Field Microscope
Explanation: Dark field microscopy illuminates the specimen so that scattered light enters the objective, making the specimen appear bright against a dark background.
Q30. Which of the following is an important application of a comparison microscope in forensic science?
A. Determination of blood group
B. Comparison of firearm evidence
C. DNA amplification
D. Separation of proteins
Answer: B. Comparison of firearm evidence
Explanation: A comparison microscope is extensively used in forensic ballistics to compare microscopic striations and markings on bullets and cartridge cases.
Section 4: Electrophoresis and Its Types
Q31. Electrophoresis is primarily based on the movement of charged particles under the influence of:
A. Magnetic field
B. Electric field
C. Gravitational force
D. Centrifugal force
Answer: B. Electric field
Explanation: Electrophoresis is a separation technique in which charged molecules migrate towards oppositely charged electrodes under an applied electric field.
Q32. Which electrophoresis technique is commonly used for the separation of DNA fragments?
A. Paper Chromatography
B. Agarose Gel Electrophoresis
C. Thin Layer Chromatography
D. Gas Chromatography
Answer: B. Agarose Gel Electrophoresis
Explanation: Agarose gel electrophoresis separates DNA fragments mainly according to their size. Smaller DNA fragments generally migrate faster through the gel matrix.
Q33. DNA molecules migrate towards which electrode during electrophoresis?
A. Anode (positive electrode)
B. Cathode (negative electrode)
C. Both electrodes
D. Neither electrode
Answer: A. Anode (positive electrode)
Explanation: DNA has a negatively charged phosphate backbone. Therefore, DNA migrates towards the positively charged anode during electrophoresis.
Q34. Which electrophoresis technique is commonly used for the separation of proteins based on their molecular weight?
A. SDS-PAGE
B. Agarose Gel Electrophoresis
C. Capillary Electrophoresis
D. Immunoelectrophoresis
Answer: A. SDS-PAGE
Explanation: Sodium Dodecyl Sulphate Polyacrylamide Gel Electrophoresis (SDS-PAGE) denatures proteins and gives them a nearly uniform negative charge-to-mass ratio, allowing separation primarily according to molecular weight.
Q35. What is the primary function of SDS in SDS-PAGE?
A. To stain proteins
B. To provide proteins with a uniform negative charge-to-mass ratio
C. To increase protein concentration
D. To break DNA strands
Answer: B. To provide proteins with a uniform negative charge-to-mass ratio
Explanation: SDS is an anionic detergent that denatures proteins and coats them with negative charges, reducing the influence of their native shape and charge on migration.
Q36. Which electrophoresis technique separates proteins according to their isoelectric points?
A. Agarose Gel Electrophoresis
B. Isoelectric Focusing
C. SDS-PAGE
D. Capillary Electrophoresis
Answer: B. Isoelectric Focusing
Explanation: Isoelectric focusing separates proteins according to their isoelectric point (pI). Each protein migrates through a pH gradient until it reaches the pH at which its net charge becomes zero.
Q37. Capillary electrophoresis is particularly useful in forensic science for:
A. Determining the age of bones
B. DNA fragment analysis
C. Examining firearm striations
D. Identifying glass fractures visually
Answer: B. DNA fragment analysis
Explanation: Capillary electrophoresis separates DNA fragments according to their electrophoretic mobility. It is widely used in STR DNA profiling.
Q38. Which electrophoresis technique combines the separation of proteins according to their isoelectric point and molecular weight?
A. Two-Dimensional Gel Electrophoresis
B. Paper Electrophoresis
C. Immunoelectrophoresis
D. Zone Electrophoresis
Answer: A. Two-Dimensional Gel Electrophoresis
Explanation: Two-dimensional electrophoresis separates proteins first by isoelectric focusing and then by molecular weight using SDS-PAGE.
Q39. Which of the following electrophoresis methods is particularly useful for separating proteins based on their charge and antigen-antibody interactions?
A. Immunoelectrophoresis
B. SDS-PAGE
C. Agarose Gel Electrophoresis
D. Capillary Electrophoresis
Answer: A. Immunoelectrophoresis
Explanation: Immunoelectrophoresis combines electrophoretic separation of antigens with antigen-antibody reactions to identify specific proteins.
Q40. In forensic DNA profiling, the use of fluorescently labelled primers is particularly associated with:
A. STR analysis using capillary electrophoresis
B. Paper chromatography
C. Atomic absorption spectroscopy
D. Light microscopy
Answer: A. STR analysis using capillary electrophoresis
Explanation: Fluorescently labelled primers are used during PCR amplification of STR loci. The amplified fragments are subsequently separated and detected using capillary electrophoresis.
Section 5: Advanced Techniques Used in Forensic Science
Q41. Which technique combines chromatography with mass spectrometry for the identification of complex mixtures?
A. GC-MS
B. UV-Visible Spectroscopy
C. TLC
D. SEM
Answer: A. GC-MS
Explanation: GC-MS combines the separation capability of gas chromatography with the identification capability of mass spectrometry. It is commonly used for drug analysis, toxicology and explosive residue examination.
Q42. LC-MS/MS is particularly useful for:
A. Examination of bullet striations
B. Detection and quantification of drugs and metabolites in biological samples
C. Determination of handwriting characteristics
D. Examination of glass fractures using a microscope
Answer: B. Detection and quantification of drugs and metabolites in biological samples
Explanation: Liquid Chromatography-Tandem Mass Spectrometry (LC-MS/MS) provides highly sensitive and selective analysis of compounds, particularly those that are polar, non-volatile or thermally unstable.
Q43. Which technique is used to amplify specific DNA regions before forensic DNA profiling?
A. PCR
B. HPLC
C. AAS
D. FTIR
Answer: A. PCR
Explanation: Polymerase Chain Reaction (PCR) amplifies specific DNA sequences, producing millions of copies from a small quantity of DNA. It is essential in forensic DNA profiling.
Q44. STR analysis is primarily based on the examination of:
A. Single nucleotide substitutions only
B. Short tandem repeat sequences
C. Protein structures
D. Lipid molecules
Answer: B. Short tandem repeat sequences
Explanation: STRs are short DNA sequences repeated consecutively at specific genomic locations. Variation in repeat numbers among individuals makes STR analysis useful for human identification.
Q45. Which technique is commonly used to determine the elemental composition of gunshot residue?
A. SEM-EDS
B. TLC
C. PCR
D. NMR
Answer: A. SEM-EDS
Explanation: Scanning Electron Microscopy coupled with Energy Dispersive X-ray Spectroscopy (SEM-EDS) provides information about the morphology and elemental composition of gunshot residue particles.
Q46. Fourier Transform Infrared Spectroscopy (FTIR) is particularly useful in forensic science for the identification of:
A. DNA sequences
B. Polymers, fibres, paints and drugs
C. Fingerprint ridge patterns
D. Blood group antigens only
Answer: B. Polymers, fibres, paints and drugs
Explanation: FTIR provides characteristic infrared absorption spectra that help identify chemical bonds and functional groups in materials such as fibres, paints, plastics and drugs.
Q47. Which technique is commonly used for the non-destructive elemental analysis of glass fragments?
A. X-ray Fluorescence (XRF)
B. PCR
C. SDS-PAGE
D. Paper Chromatography
Answer: A. X-ray Fluorescence (XRF)
Explanation: XRF determines the elemental composition of glass without necessarily destroying the sample. Elemental profiles can help compare glass fragments recovered from different locations.
Q48. MALDI-TOF is an analytical technique that is particularly associated with:
A. Measurement of molecular mass
B. Examination of handwriting
C. Determination of bullet calibre
D. Measurement of electrical resistance
Answer: A. Measurement of molecular mass
Explanation: Matrix-Assisted Laser Desorption/Ionization Time-of-Flight Mass Spectrometry (MALDI-TOF MS) ionizes molecules using laser energy and separates ions according to their mass-to-charge ratio. It is useful for analysing proteins, peptides and other biomolecules.
Q49. Which technique is particularly useful for determining the age of biological samples through the analysis of DNA methylation patterns?
A. Epigenetic Analysis
B. Paper Chromatography
C. Atomic Absorption Spectroscopy
D. X-ray Diffraction
Answer: A. Epigenetic Analysis
Explanation: DNA methylation patterns change with age at particular genomic locations. Analysis of these changes can be used for forensic age estimation, although accuracy depends on the tissue and model used.
Q50. Which advanced technique is used to determine the crystal structure and crystalline phases of materials?
A. X-ray Diffraction (XRD)
B. PCR
C. GC-MS
D. Capillary Electrophoresis
Answer: A. X-ray Diffraction (XRD)
Explanation: XRD studies the diffraction pattern produced when X-rays interact with crystalline materials. It is useful in forensic examination of minerals, pigments, powders and other crystalline substances.
For more questions, click here

0 Comments